1 / 3
amogtech
2 / 3
mhk
3 / 3
ccg


EIGRP is Enhanced Interior Gateway Routing Protocol and it is an advanced distance vector routing protocol. The example of how to configure EIGRP in Cisco IOS Routers is shown in the below with the picture together. I hope this example will be benefit for brothers and sisters who are learning Cisco Networking.

 

Router 1

Activate the connection to PC1
en
config t
int g0/0
ip address 192.168.1.1 255.255.255.0
no shut
 

Activate the connection to Router2
int s0/0/1
ip address 223.200.100.9 255.255.255.252
clock rate 64000
no shut
 

Activate the connection to Router 3
int s0/0/0
ip address 223.200.100.1 255.255.255.252
no shut
exit

 

Configure EIGRP
router eigrp 10
network 192.168.1.0 0.0.0255
network 223.200.100.0 0.0.0.3
network 223.200.100.8 0.0.0.3
end
 


Save the configuration
copy run start
 

Router 2

Activate the connection to PC2
en
config t
int g0/0
ip address 192.168.2.1 255.255.255.0
no shut


Activate the connection to Router 1
int s0/0/1
ip address 223.200.100.10 255.255.255.252
no shut


 
Activate the connection to Router 3
int s0/0/0
ip address 223.200.100.6 255.255.255.252
no shut
exit

 
Configure EIGRP
router eigrp 10
network 192.168.2.0 0.0.0.255
network 223.200.100.8 0.0.0.3
network 223.200.100.4 0.0.0.3
end

 
Save the configuration
copy run start
 

Router 3
Activate the connection to PC3
en
config t
int g0/0
ip address 192.168.3.1 255.255.255.0
no shut


Activate the connection to Router 1
int s0/0/0
ip address 223.200.100.2 255.255.255.252
clock rate 64000
no shut

 
Activate the connection to Router 2
int s0/0/1
ip address 223.200.100.5 255.255.255.252
clock rate 64000
no shut
exit

 
Configure EIGRP
router eigrp 10
network 192.168.3.0 0.0.0.255
network 223.200.100.0 0.0.0.3
network 223.200.100.4 0.0.0.3
end
 

Save the configuration
copy run start

 

If you want to see sample configuration in packet tracer, please click here to download pkt file.

(Note: you need to give ip address, subnet mask and default gateway to the hosts)


Share On:

What do you think?

Send us feedback!