1 / 4
Computer Service
2 / 4
Networking Service
3 / 4
Web Development Service
4 / 4
Software Development Service
TNW - ICT Solutions
  • Home
  • Available Courses 
  • Available Services 
  • Website Samples 
  • Search Log In
  • EIGRP is Enhanced Interior Gateway Routing Protocol and it is an advanced distance vector routing protocol. The example of how to configure EIGRP in Cisco IOS Routers is shown in the below with the picture together. I hope this example will be benefit for brothers and sisters who are learning Cisco Networking.

     

    Router 1

    Activate the connection to PC1
    en
    config t
    int g0/0
    ip address 192.168.1.1 255.255.255.0
    no shut
     

    Activate the connection to Router2
    int s0/0/1
    ip address 223.200.100.9 255.255.255.252
    clock rate 64000
    no shut
     

    Activate the connection to Router 3
    int s0/0/0
    ip address 223.200.100.1 255.255.255.252
    no shut
    exit

     

    Configure EIGRP
    router eigrp 10
    network 192.168.1.0 0.0.0255
    network 223.200.100.0 0.0.0.3
    network 223.200.100.8 0.0.0.3
    end
     


    Save the configuration
    copy run start
     

    Router 2

    Activate the connection to PC2
    en
    config t
    int g0/0
    ip address 192.168.2.1 255.255.255.0
    no shut


    Activate the connection to Router 1
    int s0/0/1
    ip address 223.200.100.10 255.255.255.252
    no shut


     
    Activate the connection to Router 3
    int s0/0/0
    ip address 223.200.100.6 255.255.255.252
    no shut
    exit

     
    Configure EIGRP
    router eigrp 10
    network 192.168.2.0 0.0.0.255
    network 223.200.100.8 0.0.0.3
    network 223.200.100.4 0.0.0.3
    end

     
    Save the configuration
    copy run start
     

    Router 3
    Activate the connection to PC3
    en
    config t
    int g0/0
    ip address 192.168.3.1 255.255.255.0
    no shut


    Activate the connection to Router 1
    int s0/0/0
    ip address 223.200.100.2 255.255.255.252
    clock rate 64000
    no shut

     
    Activate the connection to Router 2
    int s0/0/1
    ip address 223.200.100.5 255.255.255.252
    clock rate 64000
    no shut
    exit

     
    Configure EIGRP
    router eigrp 10
    network 192.168.3.0 0.0.0.255
    network 223.200.100.0 0.0.0.3
    network 223.200.100.4 0.0.0.3
    end
     

    Save the configuration
    copy run start

     

    If you want to see sample configuration in packet tracer, please click here to download pkt file.

    (Note: you need to give ip address, subnet mask and default gateway to the hosts)