1 / 4
Computer Service
2 / 4
Networking Service
3 / 4
Web Development Service
4 / 4
Software Development Service
TNW - ICT Solutions
  • Home
  • Available Courses 
  • Available Services 
  • Website Samples 
  • Search Log In
  • The example of how to configure the Frame Relay in Cisco Networking Devices is shown in the below with the picture together. I hope this example will be benefit for brothers and sisters who are learning Cisco Networking.

     

     

    Router 1
    en
    config t
    hostname R1
    int g0/0
    ip address 192.168.1.1 255.255.255.0
    no shut

     
    int s0/0/0
    description Link From Router1 to Router2
    ip address 223.128.1.1 255.255.255.252
    encap frame-relay
    frame-relay lmi-type cisco
    frame-relay interface-dlci 101
    no shut


    int s0/0/1
    encap frame-relay
    no shut
    exit
     

    int s0/0/1.201 point-to-point
    description Link From R1 to R3
    ip address 223.128.1.5 255.255.255.252
    frame-relay interface-dlci 201
    no shut
    exit

     
    int s0/0/1.301 point-to-point
    description Link From R1 to R4
    ip address 223.128.1.9 255.255.255.252
    frame-relay interface-dlci 301
    no shut
    exit

     
    int s0/0/1.401 point-to-point
    description Link From R1 to R5
    ip address 223.128.1.13 255.255.255.252
    frame-relay interface-dlci 401
    no shut
    exit

     
    int s0/0/1.501 point-to-point
    description Link From R1 to R6
    ip address 223.128.1.17 255.255.255.252
    frame-relay interface-dlci 501
    no shut
    exit

     
    router rip
    version 2
    network 192.168.1.0
    network 223.128.1.0
    network 223.128.1.4
    network 223.128.1.8
    network 223.128.1.12
    network 223.128.1.16
    end
    copy run start


     
    Router 2
    en
    config t
    hostname R1
    int g0/0
    ip address 192.168.2.1 255.255.255.0
    no shut

     
    int s0/0/0
    description Router2 to Router1
    ip address 223.128.1.2 255.255.255.252
    encap frame-relay
    frame-relay lmi-type cisco
    frame-relay interface-dlci 102
    no shut
    exit
     

    router rip
    version 2
    network 192.168.2.0
    network 223.128.1.0
    end
    copy run start
     


    Router 3

    en
    config t
    hostname R3


    int g0/0
    description Link From Router3 to Router1
    ip address 192.168.3.1 255.255.255.0
    no shut

     
    int s0/1/0
    description Link From Router3 to Router1
    ip address 223.128.1.6 255.255.255.252
    encap frame-relay
    frame-relay lmi-type cisco
    frame-relay interface-dlci 103
    no shut
    exit
     

    router rip
    version 2
    network 192.168.3.0
    network 223.128.1.4
    end
    copy run start
     


    Router 4
    en
    config t
    hostname R4


    int g0/0
    ip address 192.168.4.1 255.255.255.0
    no shut
     

    int s0/1/0
    description Link From R4 to R1
    ip address 223.128.1.10 255.255.255.252
    encap frame-relay
    frame-relay lmi-type cisco
    frame-relay interface-dlci 104
    no shut
     
    exit

    router rip
    version 2
    network 192.168.4.0
    network 223.128.1.8
    end
    copy run start
     


    Router 5
    en
    config t
    hostname R5


    int g0/0
    ip address 192.168.5.1 255.255.255.0
    no shut
     

    int s0/0/0
    description Link From Router5 to Router1
    ip address 223.128.1.14 255.255.255.252
    encap frame-relay
    frame-relay lmi-type cisco
    frame-relay interface-dlci 105
    no shut
    exit

     
    router rip
    version 2
    network 192.168.5.0
    network 223.128.1.12
    end
    copy run start
     


    Router 6
    en
    config t
    hostname R6


    int g0/0
    ip address 192.168.6.1 255.255.255.0
    no shut


    int s0/1/0
    description Link From Router6 to Router1
    ip address 223.128.1.18 255.255.255.252
    encap frame-relay
    frame-relay lmi-type cisco
    frame-relay interface-dlci 106
    no shut
    exit


    router rip
    version 2
    network 192.168.6.0
    network 223.128.1.16
    end
    copy run start

     

       ***Thank You***