1 / 4
Computer Service
2 / 4
Networking Service
3 / 4
Web Development Service
4 / 4
Software Development Service
TNW - ICT Solutions
  • Home
  • Available Courses 
  • Available Services 
  • Website Samples 
  • Search Log In
  • VLan is virtual local area network. It is mostly used to manage the hosts in the network. The example of how to configure VLan in Cisco Networking Devices is shown in the below with the picture together. I hope this example will be benefit for brothers and sisters who are learning Cisco Networking.

     

     

    Switch 0

    Creating VLan
    en
    config t

    hostname tnw87.com
    vlan 10
    name IT_Department
    vlan 20
    name HR_Department
    vlan 30
    name Engineering_Department
    end

     

    Checking VLan (VLan we've created is  working or not)
    show vlan brief

     

    Define Switch Ports
    config t
    int f0/1
    no shut
    switchport mode trunk
    exit


    int f0/2
    no shut
    switchport mode access
    switchport access vlan 10
    exit
     

    int f0/3
    no shut
    switchport mode access
    switchport access vlan 20
    exit
     

    int f0/4
    no shut
    switchport mode access
    switchport access vlan 30
    end

     

    Save Configuration
    copy run start

     
    Router 0
    en
    config t
    hostname tnw87.com
    int g0/0
    no shut
    int g0/0.1
    encapsulation dot1Q 10
    ip address 192.168.1.1 255.255.255.0
    no shut
    exit

     
    int g0/0.2
    encapsulation dot1Q 20
    ip address 192.168.2.1 255.255.255.0
    no shut
    exit

     
    int g0/0.3
    encapsulation dot1Q 30
    ip address 192.168.3.1 255.255.255.0
    no shut
    exit
     

    router rip
    version 2
    network 192.168.1.0
    network 192.168.2.0
    network 192.168.3.0
    end
    copy run start



    If you want to do testing VLan configuration in packet tracer, please click here to download VLan.pkt.